Boyesen Home

Boyesen Engineering

Skip to Main Content »

Search Site
Posted Date: 2013-09-25
New RC2 Series Rad Valve for 2014 Kawasaki KX 85/100
RC2 System integration yields Horsepower Gains for Kawasaki’s new mini!
Boyesen Engineering would like to introduce the all-new 2014 RC2 Series Rad Valve, designed to increase overall horsepower and throttle response in the 2014 Kawasaki KX 85/100.

The new RC2 Series Rad Valve is “Performance Optimized” - tailor made to give the new 2014 KX 85/100 greater performance and horsepower. While other aftermarket valves might change flange sizes or bolt patterns, they're basically generic - but with the RC2 Series Rad Valve, there are no compromises in reed life, and no modifications required to fit the valve while upgrading your mini’s reed intake system. The Result: A true, bolt-on Power increase specifically made for YOUR Kawasaki KX 85/100.

The RC2 Series Rad Valve multi-stage reed petal system has been designed to increase throttle response and acceleration, while also broadening peak RPM horsepower output. The Rad Valve’s seamless, one-piece, precision casting and continuous aero-form surfacing provide maximum flow velocities and instant, explosive movement of air particles the moment you turn the throttle. Standard equipment on each Rad Valve, are Boyesen’s dual-stage carbon reed petals. The race-proven reed petals are integral in providing the superior ability to maintain timing with the power pulses of the 2014 engine platform. Your KX will gain maximum flow velocity across the entire RPM range, and at all throttle settings. Smooth. Sharp. Smart. The result: Full Spectrum horsepower and lightning – fast response.

The ONLY performance system with aerodynamic internal surfacing. The Rad Valve’s internal precision surfacing treatment eliminates all hard edges that interrupt the proper delivery of air and fuel. Because internal air turbulence is virtually non-existent, the proper air/fuel control is optimized for the new 2014 Kawasaki 85/100.

Model-specific reed tension for maximal response.
The Rad Valve’s Multi-Staged reed petal stacks feature Aerospace carbon material interwoven into tension combinations that maximize power delivery and peak horsepower. Boyesen engineers specifically tune the carbon matrix tension using a model-specific weave formula that is tested and optimized for the 2014 Kawasaki minis.

One reed petal is NOT enough!
The reed petals in modern Mini and Supermini engines take an incredible amount of abuse! At peak RPM reed petals are opening and closing hundreds of times per second. Over time, a single reed loses its ability to regulate flow rates in proper proportions. This causes a loss of reed petal reaction and reduces the consistency of peak horsepower. MS PLUS Optimization uses multi-staged reed petals to distribute the engine’s pulse forces over more surface area. By using a multiple reed petal stack, it is possible to achieve peak horsepower AND durability. The patented multi-stage design incorporates a specially shaped top reed petal and a ported bottom reed petal. The top petal is lightweight and resilient for crisp throttle response at partial throttle or low RPMs. The stiffer, bottom petal is ported to provide maximum flow and horsepower at higher RPMs.

The most durable materials. The most lifespan.
The RC2 Series Rad Valve now features category-leading toughening additives to increase reed petal lifespan by resisting breakdown from damaging agents found in fuel. This is done to ensure a long-lasting seal between the petals and the intake tract time and time again, which results in more consistent horsepower for longer periods of time between general intake reed maintenance.

The manufacturer's suggested retail price of Boyesen’s Kawasaki KX 85/100 RC2 Series Rad Valve Intake System is $169.95 (USD). Part Number: RAD10E

The Boyesen RC2 Series Rad Valve system is available at your local dealer or popular web retailers. If your regional dealership has chosen not to stock this product, Boyesen also makes it available for purchase at our webstore.

Since it’s inception in 1972, Boyesen sets the standard in which all other high-performance components and intake systems are measured against. For more than 40 years Boyesen has specialized in the design and manufacture of high-performance parts to the power sports industry.

The design knowledge gained by Factory Race Team Research and Development partnerships, such as Monster Energy Kawasaki, bleeds all the way down to weekend warriors looking for the highest performing and longest lasting products on the market. Boyesen’s tagline, “Leading Edge Performance”, is recognized worldwide. From their innovative industry-leading Supercooler performance waterpump kit, to their complete Rad Valve Performance Intake System, Boyesen continues to consistently set the standard for aftermarket bolt-on performance within Motocross and Offroad racing circles world-wide.
Keywords: 2014 Kawasaki KX 85, 2014 Kawasaki KX 100, Boyesen Rad Valve, Motocross Performance Air Intake System, Dirt Bike Parts, RC2 Rad Valve, Kawasaki Performance Parts, Two Stroke Intake Systems, Air Intake, Dirt Bike Parts, RC2 Series Rad Valve, Boyesen, Boyesen Engineering, Laminar Flow, Motocross Performance, Air Velocity, Performance Intake, Throttle Response, Motocross Parts, Boyesen Rad Valve, Motocross Performance Parts, Motorcycle Parts
About Boyesen
For more than 30 years Boyesen has specialized in the design and manufacture of high-performance parts to the power sports industry. The confidence instilled by Factory Race Team Research and Development partnerships bleeds all the way down to weekend warriors looking for the highest performing and longest lasting products on the market. Boyesen's tagline, "Leading Edge Performance", is recognized worldwide. From their innovative industry leading performance reeds, to their complete intake track System, Boyesen continues to consistently set the standard for performance and manufacturing build quality.
2011-2019 Boyesen Inc. All Right Reserved.